| 　 | P9000-01 | P9000-02 |
| Measurement functions | Waveform monitor output only
Frequency characteristics: DC to 100 kHz, -3 dB | Waveform monitor output/AC RMS value output (switchable)
Wave mode frequency characteristics: DC to 100 kHz, -3 dB
RMS mode frequency characteristics: 30 Hz to 10 kHz; response time: 300 ms (rising) or 500 ms (falling) |
| Division ratio | 1000:1 or 100:1 (user selectable) |
| DC amplitude accuracy | ±0.5% f.s. (f.s. = 1.0 V; voltage division ratio: 1000:1) (f.s. = 3.5 V; voltage division ratio: 100:1) |
| RMS amplitude accuracy | n/a | ±1% f.s. (30 Hz to 1 kHz non-inclusive, sine wave), ±3% f.s. (1 kHz to 10 kHz, sine wave) |
| Input resistance, capacity | Between H and L: 10.5 MΩ, 5 pF or less (at 100 kHz) |
| Max. allowable input | 1000 V AC/DC |
| Max. rated voltage to earth | 1000 V AC/DC (CAT III) |
| Operating temperature | -40ËšC (-40ËšF) to 80ËšC (176ËšF) |
| Power supply | (1) AC Adapter Z1008 (100 to 240 V AC, 50/60 Hz), 6 VA (including AC adapter) or 0.9 VA (probe only)
(2) USB bus power (5 V DC, USB Micro-B receptacle), 0.8 VA
To prevent an electric shock, when supplying power from the USB-microB terminal, please supply from a device which USB's GND terminal of the source device is grounded.
(3) External power supply (2.7 V to 15 V DC) |
| Dimensions and mass | 128 mm (5.04 in)W × 36 mm (1.42 in)H × 22 mm (0.87 in)D, 170 g (6.0 oz), Cord length: Input: 70 cm (2.30 ft) ; output: 1.5 m (4.92 ft) |
| Included accessories | Instruction manual ×1, alligator clips ×2, carrying case ×1 |